MP-P35
Extreme
Intel
P35 Express + Intel ICH9 Chipset ATX Mainboard
|
|



OC-CON Capacitors.

Panasonic Capacitors

Heatpipe Heatsink

Power-on/off, Reset

Debug LED Port

Support ATi CrossFire Technology

eSATA connector
Integrated HD 8-CH Audio, Gigabit
LAN, USB2.0, eSATA and SPDIF-In/Out





|
|
 |
Support
Intel Core2 Duo and Core 2 Quad 775-Land LGA
Processor |
Support
FSB Frequency 1333 /
1066 / 800 / 533 MHz |
Support
Dual Channel DDR2 800 / 667 MHz Module |
Support
eSATA and SPDIF-in /
Out connector |
Realtek
ALC888 HD 8 Channel Audio Codec integrated |
Integrated
Realtek RTL8111B 10/100/1000Mb Fast Ethernet LAN |
|
 |
Processor
- North Bridge : Intel P35 Express Chipset,
- South Bridge : Intel FW82801IB I/O Controller Hub
( ICH9 ) Chipset,
|
Chipset :
- Support Intel Core2 Duo and Core 2 Quad 65nm processor
- Support Intel Pentium4, Celeron-D 4xx and Pentium D processor
- Support FSB Frequency 1333 /
1066 / 800 / 533MHz.
|
Memory Socket :
- 240-pin DDR2 RAM module socket x 4
- Support Dual Channel DDR2 800 / 667 MHz RAM Module
and which
is expandable to 8.0GB
|
Expansion Slots :
- PCI-Express x16 slot x 2pc.
- PCI-Express x1 slot x 2pc.
- 32bit PCI slot x 2pcs.
|
| Integrate IDE and Serial ATA-II :
- Support Ultra DMA 66 / 100 / 133
- Support four Serial ATA-II Devices
- JMB363 Serial ATA RAID 0, 1 function
- Support External SATA-II ( eSATA )
|
LAN :
- Integrated Realtek RTL8111B PCI-Express Gigabit LAN
- Support Fast Ethernet LAN function of providing 10/100 /1000
Mb/s data transfer rate
|
Audio Codec :
- Realtek ALC888 HD 8-channel Audio Codec integrated
- Support HD 8-channel 3D surround & Positioning Audio
|
Onboard
I/O Connectors :
- PS/2 keyboard and PS/2 mouse connectors
- Floppy disk drive connector x 1pc
- eSATA connector x 1pc
- Parallel header x 1pc
- Serial port x 1 pc
- SPDIF-in / Out connector x 1pc
- USB 2.0 connector x 4, headers x4 (connecting cable option)
- Audio connector (Line-in, Line-out, MIC/ 8CH Audio)
*Remark : The External Serial ATA-II (eSATA) enable the full SATA interface
speed
outside the chassis, up to 3Gb/s. The eSATA port can be
enabled
only when the SATA 7 is connected to one of SATA 1~SATA4.
|
| Design
:
- Micro ATX form factor 4 layers PCB size: 30.5 x 23.5cm.
|
| |